📧 Contact Us: sales@dmd.es
💬(+34) 615 18 50 77
CABLE_MJRC. Cable audio stereo Mini Jack 3.5mm to RC Female Connector (For signal SPPM, RC standar t...
Adapter cable to connect with a standard RC transmitter (An adapter cable is needed for the trainer port of your standard RC transmitter).
This cable connects to the SPPM input of BTSD1 and to a trainer port adapter cable to connect with your standard RC transmitter.
Example connection diagram:
Technical Characteristics:
- Connector: Mini Jack stereo 3.5mm.
- Connector: RC Servos Male (Dupont 2.54 3p).
- Length: 610mm.
x1. CABLE_MJRC. Cable audio stereo Mini Jack 3.5mm to RC Female Connector (For signal SPPM, RC standar transmitter to BTSD1 transmitter).
Delivery date: Can be shipped within 1-2 days.
CABLE_PX_RX. Adapter cable for pixhawk and RXLRS (Mavlink Telemetry)
The cable can be connected directly to the "TELEM1" or "TELEM2" port of your pixhawk cube or similar autopilot (With JST Connector of 6Ways) and to the "MODEM" port of your RXLRS receiver.
Example connection diagram:
Technical Characteristics:
- Connector: RC Servos Male (Dupont 2.54 3p).
- Connector: JST connector (6 Ways).
- Length: 230mm.
x1. CABLE_PX_RX. Adapter cable for pixhawk and RXLRS (Mavlink Telemetry).
Delivery date: Can be shipped within 1-2 days.
CABLE_PX_XOSD. Adapter cable for pixhawk and XOSD (Mavlink Telemetry)
The cable can be connected directly to the "TELEM1" or "TELEM2" port of your pixhawk cube or similar autopilot (With JST Connector of 6Ways) and to the "CH4/MAV" port of your XOSD video transmitter.
Example connection diagram:
Technical Characteristics:
- Connector: RC Servos Male (Dupont 2.54 3p).
- Connector: JST connector (6 Ways).
- Length: 230mm.
x1. CABLE_PX_XOSD. Adapter cable for pixhawk and XOSD (Mavlink Telemetry).
Delivery date: Can be shipped within 1-2 days.
CABLE_RXVOLTADAP. Voltage adapter cable for CH4 (RXLRS), 280mm.
RXLRS receivers can read the voltage of an external battery from CH4, then the voltage is displayed on the XLRS transmitter (D2, D3, D4).
Before connecting this cable, you need to configure channel 4 of the RXLRS to work in voltmeter mode.
Voltage adapter cable for CH4 (RXLRS) with female RC connector and stripped cable at the other end.
Technical Characteristics:
- Connector: RC Servos Female.
- Length: 280mm.
- Article: Read external battery voltage from CH4 (RXLRS).
- Connection diagram: RXLRS + Voltage adapter cable.
x1. CABLE_RXVOLTADAP. Voltage adapter cable for CH4 (RXLRS), 280mm.
Delivery date: Can be shipped within 1-2 days.
CABLE_SERVO_HH. Servo Cable RC Female to Female, 200mm.
Cable with connector RC Female at two extremes.
Approximate length of cable, 200mm.
Technical Characteristics:
- Connector: RC Servos Female.
- Length: 200mm.
x1. CABLE_SERVO_HH. Servo Cable RC Female to Female, 200mm.
Delivery date: Can be shipped within 1-2 days.
CABLE_TRAINERPORT. Cable RC transmitter for Trainer Port.
Adapter cable to connect to the trainer port of a standard RC transmitter. If used together with the cable (CABLE_MJRC) it can be connected directly to a BTSD1 transmitter or it can also be used to connect with an RC / FPV simulator.
Example connection diagram:
Technical Characteristics:
- Connector (Optional): Futaba DIN-6, Futaba square, Hitec (DIN-6), Multiplex (DIN-5), JR/Spektrum (Jack 3.5mm mono), Graupner (Jack stereo 3.5mm), S-Sky/Storm (MiniDIN4)...
- Connector: Female Mini Jack 3.5mm.
x1. CABLE_TRAINERPORT. Cable RC transmitter for Trainer Port.
Delivery date: Can be shipped within 1-2 days.
CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m.
Cable compatible USB 2.0 with connector type USB-A Male at one extreme and Micro USB-B Male at the other extreme.
Approximate length of cable, 2m.
Technical Characteristics:
- Connector: USB-A.
- Connector: Micro USB-B.
- Length: 2m.
x1. CABLE_USB/MICROUSB. Cable USB-A Male to Micro USB-B Male, 2m.
Delivery date: Can be shipped within 1-2 days.
CHAR_HOTRC. Lipo battery charger 40W for 3S / 4S.
Charger for GCSD4 with 5A or 16A batteries.
Technical Characteristics:
Max charge current: 3A.
Battery type: 3S / 4S lipo.
Balanced current: 300mAh/cell.
Max charge power: 40W.
Charge stop voltage: 4.2V ±0.02V.
Shell material: ABS+pc fireproof material.
Display accuracy: ±0.05V.
Weight: 138g.
Size: About 100*60*30mm.
x1. CHAR_HOTRC. Lipo battery charger 40W for 3S / 4S.
* Doesn't include 3S (CABLE_JST-XH_3S) or 4S (CABLE_JST-XH_4S) cables. Delivery date: Can be shipped within 2-3 days.
CHARXP. USB Charger for XLRS Transmitters, 5V – 1A.
Standard USB charger for XLRS Transmitters, smart phones, similar devices, etc.
Technical Characteristics:
CONTENT:
- Input: 100-240V, 50/60Hz, 0.15A.
- Output: 5V - 1A.
x1 CARXP. USB Charger for XLRS Transmitters, 5V - 1A.
*USB cable not included. Delivery date: Can be shipped within 1-2 days.
DCDC38/5VRC. DCDC adjustable step down module, INP 4-38V, OUT 1.25-32V(Adjustable), OUT CURRENT 5A.
Ajustable DCDC module, Input 4-38V, Output 1.25-32V(Adjustable), Output Current 5A.
The input has two stripped wires (Red + "positive" and Black - "GND"), ready to solder a connector (xt60, xt90, T026 or Banana...) suitable to connect directly to your battery.
The output has an RC (Futaba) connector and is set by default to 5V to connect directly to XLRS reveivers or video transmitters or modules that work to 5V. (it has a potentiometer to be able to increase or decrease the voltage, (Voltmeter is needed to adjust)).
SPECIFICATION:
Input voltage: DC 4V ~ 38V. Output voltage: DC 1.25V ~ 32V (by default 5V) (Adjustable). Output current: 0A ~ 5A. Output power: 75W (More than 50W please add heat sink). Operating Frequency: 180KHz. Operating Temperature: -40°C ~ +85°C. Load regulation: S(I)≤0.8%. Voltage regulation: S(u)≤0.8%.
Recommendations: The voltage limit we recommend for this type of DCDC is to use it with a maximum battery of 6 cells (25.2V). CONTENT:x1 DCDC38/5VRC. DCDC adjustable step down module, INP 4-38V, OUT 1.25-32V(Adjustable), OUT CURRENT 5A.
Delivery date: Can be shipped within 1-2 days.
GCS_MTRI. Tripod and reinforced anchor for GCSD4.
With this accessory you no longer need to use a cumbersome and heavy side table to place your GCSD4.
Now with the CGS_MTRI accessory you can directly attach the sturdy tripod together with your GCSD4, the installation is very simple plug & play, attach the tripod to your GCSD4 and ready to work!
You can see a video of the tripod and the GCSD4 here:
The tripod includes a spike-shaped aluminum for mountainous terrain or fields, in this way it will always be well placed on the ground and fixed.
This product includes mounting the GCS_MTRI accessory to your GCSD4 and the carrying bag for the tripod.
Add this product together with the GCSD4 to the order and we will install the entire set.
Tripod:
Professional tripod without central column, in aluminum. Very robust tripod with great stability with hemisphere leveling system, load up to 25 kg.
High strength aluminum alloy, twist closures.
Technical characteristics:
Maximum height: 1500 mm
Load: 25 kg
Minimum height: 120 mm
Closed dimensions: 545 mm
Weight: 2500gr
Material: Aluminum
Sections: 4 sections
Transport Bag: Yes
Note: If you already have a GCSD4 and want this option, you will need to purchase the product and send the GCSD4 to DMD for us to make the modification.
LAT19_SMAF/SMAM. Cable SMA-Female to SMA-Male, 190mm.
Cable with connector type SMA-Female at one extreme and SMA-Maleat the other extreme.
Approximate length of cable, 190mm including connectors.
Technical Characteristics:
- Connector: SMA-Female.
- Connector: SMA-Male.
- Length: 190mm.
x1. LAT19_SMAF/SMAM. Cable SMA-Female to SMA-Male, 190mm.
Delivery date: Can be shipped within 1-2 days.
