PORTABLE DUAL GROUND CONTROL STATION FOR FPV & UAV
Fly beyond ¡Up to 200Km Range!
RADIO CONTROL AND TELEMETRY 433, 868, 902, 915, 950Mhz
READY FOR ANALOG OR DIGITAL VIDEO
Starting from 11.508€
The prices on the official website should be taken as a reference only. Visit the DMD online Shop to see updated prices.
Dual Ground Control Station D4
GCSD4DUAL Professional Portable Dual Ground Control Station, Radio Control and Telemetry of Long Range up to 200Km.
Based on the technology of Ground Control Station GCSD4.
It has integrated two XPAD4 Transmitters for pilot (Control UAV and Camera) an observer (Control Gimbal and other functions).
Total Control: Radio Control, telemetry, analog video, Instrumental, maps and navigation.
Vehicless: VANT, UAV, UUV, UGV, ROV, USV, ASV, DRONES, Multirotors, Aircraft, Helicopters, Car, Boats, Robots, etc.
Partners: You can customize the control panel with your logo, personalized decoration, texts monitors, PC, other Joysticks and specific functionalities (Consult).
1 Start-up Key.
1 Digital voltmeter.
1 Output 11,1V power for external video monitor.
2 XPAD4 Transmitters (Pilot and Observer).
Radio Control independent of the PC.
1 Processor RC control RC.
1 Pocessor for each Joysticks.
2 OLED Mini Displays.
2 Rotary encoders.
2 Push buttons.
2 Rotary encoders with push buttons.
2 Joysticks Radio Control.
And much more…
Powerful integrated PC with Windows 10, Intel Quad Core 1.8GHz processor, 4GB RAM, 64GB flash, USB 3.0, USB 2.0, Ethernet (optional), Wifi and Bluetooth.
2 screens 10-12″of high resolution 1024 * 600 that provides a perfect visual experience, you can also control the maximum and minimum inclination from two buttons of the GCSD4V2.
Mini bluetooth keyboard that is placed behind the screen.
FPV video screens
It includes an excellent screens to see both indoors and outdoors.
IPS LED video screens 20-23″ Full HD 1920 x 1080, high brightness with 600 nits and 1000:1 high contrast with a 16:10 aspect ratio, 160º viewing angle and anti-glare.
It also independently has:
1 Audio/Vídeo Input with Jack.
1 RcBus connector to update and configure the 5.8Ghz video receiver.
1 HDMI input to directly connect a digital video system or PC of GCSD4.
1 independent video receiver of 5.8Ghz with SMA-Female.
Duration approx: 10h.
External battery charger 300W 20A AC/DC.
Connection for Smart Antenas
The Smart Antennas SMBTS (Smart Base Station) and SMRBTS (Redundant Smart Base Station) are connected with a CAT5E ethernet cable or higher to GCS, the cable can measure from 3 to 10m or more allowing a more comfortable installation of the antennas, especially in vehicles or for another type of application that needs to have the antennas away from GCS.
Two switches with red and black protective cover that don’t inadvertently activate or deactivate them and thus be able to use them in some specific safety functions for different applications.
Robust suitcase, dustproof and waterproof with IP67 certification, it has several fans to control the internal temperature. .
Dust and water tight (MIL-C-4150j, IP67) with automatic descompression valve (MIL-STD-648C).
Stainless steel closures painted in black with dust and extremely sesitant hinges.
Automatic air pressure compensation valve.
Resistant to UV rays, solvents, corrosion and fungi (MIL-STD-810F).
Temperature resistant from -30 ° to + 80 ° C.
Rubber handle for easy transport, optionally a transport belt can be used.
Total weight: 35Kg.
DMDStudio is the configuration and utilities software for all XLRS systems in Windows environment.
The same software is used for all XLRS devices. Once you learn how to configure or update a device, you can configure almost all devices, except for the differences of each device.
Update firmware of the device, accesing the BOOT tab (DS/SYS/BOOT).
It is a base station for UAVs, Drones, ROVs, etc.
It can be used to configure or control the autopilot, maps and routes with Mavlink protocol.
Free software, installed by default.
Long Range professional receiver up to 200Km or more depending on antennas and installtion, with Mavlink Telemetry and transparent radio modem of 38.4kb to 100kb.
Control 16 servos distributed between 8 PPM outputs and 1 SPPM configurable output of 8 to 16 servos.
Redundant: Increase safety and range of work, installing a 2nd receiver. Learn more…
Last technology of radios 5th generation, of long range of DMD, -116dBm of sensitivity and 1000mW of power for telemetry (According to licenses XLRS).
Powerful, it will provide you with EVLOS distant flights with security of a good radio link.
AES Encription in RF, (Optional).
Compatibility with most XLRS transmitters.
5th Generation XLRS Radio Module
5th generation XLRS radio from Digital Micro Devices. We are the manufacturer of the RF module.
Multi band ICM: 866Mhz, 868Mhz, 902, 915Mhz, 950Mhz or 433Mhz (optional).
Power: 500 or 1000mW (According license).
Sensitivity: -110 or -116dBm (According license).
Modulation: 50 or 100Kb. FHSS (Frequency Hopping Spread Spectrum).
Analog Video XVID3:
RXVID3, Diversity receiver 2.4Ghz + Transmitter 5.8Ghz 10mW.
XOSD3W, Transmitter 2.4Ghz of 1W.
XVID3 analog video system is compatible with most XLRS systems.
The RXVID3 video receiver and XOSD3 video transmitter are perfectly integrated into the XLRS devices, delivering information on the OSD of the ground components such as battery and XLRS transmitter data, video channels, brightness, etc.
Control of the video functions from XLRS Transmitter, can read and change parameters of the video in flight:
Camera selection 1 or 2.
Selection OSD page 1, 2 or 3.
Video brightness level.
Pixel level adjustable from black to white.
Internal microphone volume.
With other systems you would not have the data or the interactivity of the XLRS system.
Digital Video: Standard HD video systems that use HDMI input or Wifi throught PC with Windows, (Consult).