Ground Control Station for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
Of the XLRS series of individual Ground Controls Stations, the GCSD5 is the largest and most powerful, designed with the latest XLRS system technology of 2023, 17.3″ high-brightness screen, more powerful PC, color LCD screen
Prepared for longer duration operations, the battery has a duration of 5 hours, having a specific controller for the battery and control of the energy systems on the ground and in the vehicle.
Main benefits of using GCSD5
Full control of the vehicle.
Large 17,3″ screen for viewing the video system or second PC screen.
Powerful high-performance PC for navigation, mapping, etc.
RC/Telemetry links up to 250Km (LOS) with external XLRS radio module (WMX481).
Connection with analog or digital video systems, up to 100-150Km (LOS) with XLRS systems.
Compatibility with other telecommunications systems: Data Links, standard RC transmitters, digital video systems, etc.
Instruments with color screens showing the current status of GCSD5 and other external XLRS devices.
More than 24 programmable objects that can be assigned to one or more RC channels: Buttons, switches, Microjosyticks, encoders… all configurable for different types of vehicles.
Communication with second XLRS remote control for Copilot or Observer.
Compatibility with XLRS devices: Radio module (WMX481), SATPRO tracker antenna and others.
5 hours of autonomy.
Panel Control
All vehicle control in a single devices
Allows operators to have full control over the direction, speed, altitude and other flight or navigation variables of their vehicles during operation.
Status information in real time
In the center of the GCSD5 there is a TFT IPS color screen with 4.3″ high resolution that shows the current status of the GCS at all times, battery level, alarm messages, etc.
If you connect an external XLRS radio (WMX481) you will be able to see in real time the current status of the RSSI, RF Noise, TX and RX signal level in graph and dBm, etc.
If you have a tracker antenna (SATPRO) connected, will be able to see the current status of the antenna, X and Y position in degrees and graph, battery level, etc.
From the GCSD5 the operator will be informed of the operation and current status of each XLRS device.
PC Integrated
PC based on Intel Core™ m3-8100Y, is a Dual-Core 1.1GHz CPU that bursts up to 3.4GHz, Intel® UHD Graphics 615 integrated into the processor deliver enhanced media conversion, fast frame rates, and 4K Ultra HD (UHD) video.
Intel® Core™ M3-8100Y, Dual-Core, 1.1-3.4GHz.
Intel® UHD Graphics 615.
8GB Memory.
Dual-Band 2.5GHz/5GHz Wi-Fi & Bluetooth 4.2 & Gigabit Ethernet.
Windows 10.
Touch Display 7″, IPS, 178º visual angle, 1024×600 high resolution.
Mission Planning
From the PC you can use any mapping software, that supports the Mavlink telemetry protocol, such as Mission Planner, QGroundControl, uGCS or similar, to be able to plot routes, establish waypoints and program specific tasks for your vehicle if you use an compatible autopilot (Cube, Pixhawk, APM or similar).
More than 24 programmable objects
You can assign any (Encoders, Potentiometers, Buttons and Switches) to specific RC channels of the XLRS receiver which will allow you to completely customize your control experience, adapting it to your needs and preferences for each specific vehicle.
Customizable objects: 7 Buttons, 4 Switches with 2 positions, 2 Switches with 3 positions, 2 Push buttons, 2 MicroJoysticks of 4 positions + Enter, 2 Encoders with push button, 2 Potentiometers, 2 Joysticks RC, Auxiliary joystick of 3 axes (X, Y and Z) with push button.
Dedicated joystick for video camera or auxiliary functions
This specialized joystick with its folding design allows you to have smooth control over functions of your vehicle’s camera, X, Y and Z position, Zoom, configurable button for photo or other specific functions.
Of course it can be used for other special applications (robotic arm control, excavator control, etc.).
Internal Battery
It incorporates a 4S/14.8V/9600mAh Li-ion battery, which has a protection circuit to prevent over-consumption, low and high voltage as well as charging current control.
Approximate duration of 5 hours of continuous use, you can also continue working with the GCSD5 while charging the battery.
RC Simulator
Connect the USB dongle of your RC simulator to the SPPM input of the GCSD5 to control up to 16 RC channels and simulate their operations with the GCSD5 controls.
Display Panel
It includes an excellent screen to see both indoors and outdoors.
IPS LED video screen 17,3″ Full HD 1920 x 1080 @60Hz, high brightness with 600-1000 nits and 1000:1 high contrast and 178º viewing angle.
From the screen you can view the vehicle’s video or have a second screen for the PC. The display panel has a button to select between HDMI input for the video or auxiliary devices or HDMI for the PC.
INSI15 instrument
Information on external XLRS devices in real time
The display panel has an instrument with a 1.5″ IPS TFT color screen that can display and control various parts of the system, such as video status, batteries, RF system, Alarms, etc.
Currently, for the first firmware versions, it will show the data from the TX radio module (WMX481) and real-time status information from the SATPRO tracker antenna, antenna position, battery, etc.
Other functions
Temperature: It has a fan to dissipate the heat generated during the operation of the GCS, which helps maintain an adequate internal temperature and prevents overheating.
17.3″ display: Direct buttons to modify some functions, Menu, ON/OFF, Volume, etc.
HDMI Bi-Directional Switcher: It is connected to the PC and the HDMI input allows you to easily switch between them with the click of a button, to display as a second PC monitor or for example to view digital video through a receiver.
Connectivity
Control Panel
ON/OFF Key: Key to turn on the GCSD5.
Lipo Batt (XT60 female connector): To connect a compatible charger and recharge the GCS battery.
Power PC Button.
USB 2.0 PC: Standard connectivity for devices such as keyboards, mouse and other peripherals.
USB3.0 PC: Faster, allows connection of high-performance devices, such as external storage drives and high-resolution cameras.
Antenna Tracker SATPRO (RJ45 Connector): Ethernet connection with SATPRO tracker antenna.
1Gb Ethernet PC: Allows you to connect to high-speed local, external networks or SATPRO for digital video receiver.
SPPM INP/OUT: To connect XLRS remote controllers or other standard RC transmitters to the GCS and use it as a trainer port, you can also connect a USB Dongle for an RC simulator and control the vehicle or drone with the GCSD5 controls.
Display Panel
HDMI INP: You can connect an digital video receiver, cameras and additional video sources via HDMI, allowing you to view and control multiple video sources in real time.
USB Power: allows you to power additional devices, such as HDMI Wireless 60Ghz or other accessories.
RCBUS (Jack-Female): For communication with XLRS devices.
Side Suitcase
RCBUS (Side connector): For communication with TX radio module (WMX481), Antenna Tracker SATPRO and other XLRS devices.
Communications
GCSD5 has different types of communications to connect to XLRS devices.
RCBUS: Through the RCBUS connector on the side of the suitcase you can connect the radio transmitter module (WMX481) to have Radio Control and Telemetry Mavlink / Transparent Data Link up to 250Km (LOS), this is connected by a 7 meter cable allowing it to be placed on a tripod or a tracker antenna (SATPRO), without having RF losses, since the radio module is integrated into the RF antenna.
You can also connect to a Smart Antenna Tracker (SATPRO) To obtain an automatic tracking system of the vehicle and have more robust link with the (WMX481) transmitter radio module and if you want you can place an analog (XVID3V2) or digital video (XVHD) or other system and thus have a complete system with Radio Control, Mavlink Telemetry and Video.
Wifi: It has an internal Wifi module to communicate with other XLRS devices or to send/receive Mavlink Telemetry data to an external device: PC, Smartphone, tablet, etc. (Available in future Firmware updates).
LTE or SATCOM: For NLOS applications. (Optional, consult in sales@dmd.es).
Radio transmitter module (WMX481)
GCSD5 with SATPRO
Stability and Connectivity Assured
Gas Spring for Stability: It has a built-in gas spring that secures the display panel, avoiding unexpected closures caused by gusts of wind. This design ensures constant, uninterrupted viewing, even in adverse weather conditions.
Integral Cable Protection: The communication and power cables between the two parts of the GCS are carefully protected with strong mesh and corrugated pipe. This measure not only ensures protection from the elements, but also maintains a reliable and long-lasting connection in all conditions.
This meticulous approach to design not only improves operational stability, but also extends the life of the GCS, providing a robust solution for challenging environments.
Prepared for any type of application
GCSD5 is extremely versatile and can be used in different types of aircraft (Drones, UAVs, VTOL), land vehicles (Robots, Cars, UGV), Ships and other vehicles that require that require remote control.
Portable Remote Control for the Copilot or Observer
GCSD5 has the ability to connect a second portable XLRS remote control to suit various applications, allowing a co-pilot or observer to actively participate in the operation.
Advantages of the Second Portable Remote Control
Effective Collaboration
Connect a second remote control so a co-pilot or observer can collaborate closely with the main pilot.
Gimbal Control
Allows the observer to control gimbal functions, such as camera orientation and zoom.
Takeoff, Landing Support
In applications such as Drones, UAVs, it is common for pilots to need to get closer to the runway to perform safe takeoffs or landings.
Role Flexibility
The main pilot can focus on control and navigation, while the observer takes care of tasks related to the camera, gimbal and other specific functions.
Compatibility with XLRS Sytems
GCSD5 connects directly to a radio transmitter module (WMX481), tracker antenna (SATPRO) and XLRS remote controllers.
Data Link (Radio Control & Mavlink Telemetry / Transparent Data Link): Radio transmitter module WMX481.
Antenna Tracker (Data Link with WMX481): SATPRO.
GCSD5 Common Diagram
Use other telecommunications systems
You can use the GCS without XLRS radio system, which allows the use of other telecommunication systems for Radio Control, Telemetry and Video.
Radio Control: The GCS has an SPPM signal to send up to 16 RC channels, which allows you to assign various objects (Joysticks, Buttons, Switches, etc.) of the GCS to different RC channels and these will be sent to your RC system.
Telemetry: If your system sends telemetry data through Serial TTL, COM or USB, you can connect it directly via USB to the GCSD5 PC and communicate with any compatible software such as: Mission Planner, QGroundControl, UgCS or similar.
Digital Video: To receive the video signal you can directly connect the HDMI connector of the GCS screen.
Suitcase
Is delivered with a robust suitcase with protective foam, you can take your GCSD5 anywhere safely, your equipment will be protected and ready for use in minutes.
Robust suitcase, dustproof and airtight, watertight with MIL-STD and IP67 certification.
Automatic air pressure compensation valve.
Temperature resistant from -40 ° to + 80 ° C.
Rubber handle for easy transport, optionally a transport belt can be used.
Made from Ultra High-Impact ABS plastic.
2 eyelets for padlocks (Ø 7.62 millimeters).
Dimensions: 51.0 x 41.9 x 21.5 centimeters.
Weight: 13Kg.
Data Sheet
Designed and Manufactured in Europe
Made in Europe by us, DMD (Digital Micro Devices).
We are regular manufacturers of Ground Control Stations for professionals and specialists in radio modems.
Customized projects
Depending on the project and quantity, we can manufacture customized GCS, if you are interested contact us sales@dmd.es.
Shop XLRS
Blog XLRSD5