CURCB is used to adapt an RCBus interface to Serial TTL (38400b).
In this way you can connect a tracker antenna like SATPRO to a dataLink from other brands, to use the Mavlink protocol in streaming.
Normally it is necessary together with CURCB and SATPRO when we use a Datalink from other brands that are not XLRS.
Functioning:
2 modes:
Boot.
Streaming & Commands.
Conections:
It has two connectors, a more robust one for power and RCBus that connects to the SATPRO PC and a stereo RCBus Jack with TTL serial that connects to the Data Link.
For its complete operation it is necessary to use the CURCB module to connect the PC via USB.
It is powered by RCBus Connector from SATPRO.
Warning: Connections must be made only with the SATPRO turned off. If not, it is possible that the SATPRO or the fuse may break.
RCBUS:
SATPRO native communications. Use a special cable with power.
Speed: 1Mb. Synchronous binary packages.
IP8: 9
Serial TTL:
Level: TTL 0v to +3.3V.
Speed: 38400b by default or 115200b if necessary.
Bandwidth: 40kb. You cannot send a streaming with more than 4kbytes/sec even if the port speed is 115200b.
Serial TTL TXRX connector connection (Data Link):
Black: GND Base Jack
Red: RX (Out) Jack Tip
White: TX (Inp) Half Jack
LEDs:
On, turns on when you activate the SATPRO.
TX and RX. They light up when there is data to or from the DataLink.
CURCB is used to adapt an RCBus interface to USB.
In this way you can connect a tracker antenna like SATPRO to a PC, to give it commands or use the Mavlink protocol in streaming.
Normally it is necessary together with CTRCB and SATPRO when we use a Datalink from other brands that aren't XLRS.
Functioning:
3 modes:
Boot.
Commands.
Streaming.
Conections:
It has two connectors, one for USB type “C” that connects to the PC and another RCBus that connects to the SATPRO.
Only with the CURCB module you can command the SATPRO, but to use the Mavlink download protocol, the CTRCB module that complements it will be necessary.
RCBUS:
SATPRO native communications. Use a special 7m cable.
Speed: 1Mb. Synchronous binary packages.
IP8: 10
USB:
It is powered by USB.
Speed: 115200b fixed.
LEDs:
Power, turns on when you connect the USB.
TX and RX. They light up when there is data to or from the USB.
Professional automatic tracking antenna for Radio Control, Mavlink Telemetry and Video systems, for all types of applications with Aerial, Land or Maritime Vehicles.
SATPRO is a tracking system, composed of a rotating head, two arms where the antennas are placed and an anchoring system to a fixed base or tripod.
The main function is to automatically follow the position of the vehicle, orienting the antennas to obtain the best possible RF link at all times in LOS (Line Of Sight) applications.
This set is prepared to function as a repeater, allowing you to easily expand the range of any application. When the main system loses signal or has a very low signal, the repeater activates and the tracker antenna continues tracking the vehicle, thus optimizing performance in LOS applications and non-line-of-sight (NLOS) scenarios.
Includes:
x1 SATPRO: Professional antenna tracker.
x1 WMX481: Transmitter module for Radio Control and Telemetry.
Professional automatic tracking antenna for Radio Control, Mavlink Telemetry and Video systems, for all types of applications with Aerial, Land or Maritime Vehicles.
SATPRO V3 is a tracking system, composed of a rotating head, two arms where the antennas are placed and an anchoring system to a fixed base or tripod.
The main function is to automatically follow the position of the vehicle, orienting the antennas to obtain the best possible RF link at all times in LOS (Line Of Sight) applications.
Customizable, you can install the long range XLRS system up to 250Km (LOS) or any telecommunications system you need, including jammers for drones for example.
Get more information about the product:
The SATPRO antenna balancing accessory is a 30x30x300mm aluminum profile along with two squares that are used to join two aluminum profiles (30x30 and 50x50) at right angles, it has a guide skate for the 30x30 profile and thus be able to hang the counterweight and move it along the profile channel, in this way the weight of the antenna that we place on the SATPRO tracker antenna can be balanced.
CONTENT:
X1 Aluminum profile 30x30x300mm.
x2 Squares with angle. To join two aluminum profiles at right angles.
x1 Guide skate for profile. To hang the counterweight and be able to move it along the profile channel.
x1 Stainless Steel Carabiner with automatic locking.
x2 Knobs.