Compatibility SATPRO V2

XLRS Systems:

Connecting SATPRO to a GCSD4_V2+ or GCSD5 suitcase (XLRS Ground Control Station) or GCS_DUAL, is very easy. Similarly, you can connect it to an XLRS WMX481 radio modem or similar, with which you can achieve distances of up to 250 km.

Other Systems:

You can use radio modems or video systems from almost any brand, as long as they have a serial or Ethernet interface.

Example of use with a HM30

Prepared for Remote Installations

SATPRO V2 is designed to be used in remote installations, where it can be far from the ground control station.

This includes scenarios where the UAV or vehicle starts more than 10 km from SATPRO, or fixed installations where SATPRO is 75 km or more from the base station.

You can connect it via long-range WiFi or satellite internet, controlling the tracker as if it were only 5 meters from the ground station.

Positioning and Control Modes

SATPRO V2 can be positioned or controlled in various ways:

• Automatically with Internal Calculations:

1. 1. • Using vehicle telemetry connected via serial port, UDP, or TCP.

1. 1. • It calculates SATPRO’s position (manually or by command) using the vehicle’s GPS position automatically, either through commands or Mavlink protocol.

• Building Your Own Software Application:

1. 1. • Through text commands sent via COM, UDP, or TCP ports.

1. 1. • For example, sending “DXY=40.3,1”, SATPRO will immediately point to that direction (X 40.3º and Y 1º).

1. 1. • You can also send the GPS position of the tracker’s home and the vehicle’s GPS position for SATPRO to calculate and position itself automatically.

• Manual:

1. 1. • Through the XLRS SATPRO software console, you can control the tracker’s exact position.

1. 1. • The console also allows you to view commands and their responses, providing a clear and detailed view of the system’s status.

With these options, you can control SATPRO V2 in the way that best suits your needs.