New Data Link + Long Range Radio Control System for drones, UAV, UGV.
SPPM connection to standard RC transmitter and to PC, smart phone or tablet via USB or WIFI.
AES encryption and FHSS frequency hopping.
From 434 to 950Mhz and 500mW or 1000mW of power with a range of 250km.
It is an economical but powerful option for fully automatic and manual flights controlled from PC, Smart Phone or tablet with Mission Planner or Qground control.
It is an option similar to the Data Link DL1 V2 but with the addition of an SPPM or PWM input to connect a standard RC transmitter or via RCBus or WIFI with an XPAD1.
Compatible with Mavlink or transparent protocol, to be used with Mission Planner, Qground control or similar.
It has WIFI and battery up to 5h.
BTSD1 V3 Improvements and benefits
Greater range, up to 250Km depending on the combination of licenses and antennas. 250Km range option
Built-in battery, USB charging, allows wireless use with WIFI.
Larger color display than BTSD1 V2, you can see more data, RF coverage and telemetry.
Encoder for menu and configuration.
The PC, Smart Phone or tablet can be connected via USB or WIFI with several simultaneous connections.
Can be supplied mounted with the BQ89 directional antenna to achieve the best range at the lowest cost.
Compatible with XLRS repeaters for links out of sight of the antennas (NLOS).
BTSD1 V3 Transmitter connections
USB: PC connection for Mavlink or transparent protocol, update firmware and battery charge.
SPPM: PWM input for standard RC transmitter connection.
RCBus: Receiver firmware update, data and extensions.
COM5: TTL serial port for Mavlink output or transparent protocol (connection to antenna trackers).
WIFI: With several simultaneous connections for PC, Smart Phone or tablets without cable. It is a novelty and an advantage with the data links of the market since it facilitates the connection with a portable PC or tablet..
It uses the RXLRSD1 high performance long range RC receiver with standard servo outputs, SPPM for autopilot connection, RCBus and TTL serial port for telemetry..
Picture for reference only
Connections on the receiver:
Power supply 5-24V, direct battery
COM5: TTL serial port for Mavlink Telemetry or transparent protocol.
RCBus: Firmware update data and extensions.
CH1-8 Channls RC for servos.
BTSD1 V3 Applications
Long-range Manual and Automatic Missions. Maximum range: 250km.
Prepared for professional applications where, in addition to telemetry, manual radio control is required. It is a low-cost, long-range radio option.
If you don’t need Radio control, use the new DL1 V2, the same Data link, but without RC and cheaper.
New DL1 V2 which is very similar to the BTSD1 V3 but without SPPM input for RC transmitters and a receiver without servo output.
But if you need a long range RC transmitter with telemetry you can check out the new XPAD1.
Depending on the project and quantity, we can manufacture customized BTSD1 and receiver, if you are interested contact us email@example.com.