📧 Contact Us: sales@dmd.es
💬(+34) 615 18 50 77
CTRCB. Serial TTL to RCBUS Converter.
CURCB is used to adapt an RCBus interface to Serial TTL (38400b).
In this way you can connect a tracker antenna like SATPRO to a dataLink from other brands, to use the Mavlink protocol in streaming.
Normally it is necessary together with CURCB and SATPRO when we use a Datalink from other brands that are not XLRS.
Functioning:
2 modes:
Boot.
Streaming & Commands.
Conections:It has two connectors, a more robust one for power and RCBus that connects to the SATPRO PC and a stereo RCBus Jack with TTL serial that connects to the Data Link. For its complete operation it is necessary to use the CURCB module to connect the PC via USB.
It is powered by RCBus Connector from SATPRO.
Warning: Connections must be made only with the SATPRO turned off. If not, it is possible that the SATPRO or the fuse may break.
RCBUS:SATPRO native communications. Use a special cable with power.
Speed: 1Mb. Synchronous binary packages.
IP8: 9
Serial TTL:Level: TTL 0v to +3.3V.
Speed: 38400b by default or 115200b if necessary.
Bandwidth: 40kb. You cannot send a streaming with more than 4kbytes/sec even if the port speed is 115200b.
Serial TTL TXRX connector connection (Data Link):
Black: GND Base Jack Red: RX (Out) Jack Tip White: TX (Inp) Half Jack
LEDs:On, turns on when you activate the SATPRO.
TX and RX. They light up when there is data to or from the DataLink.
Manual: Content:x1 CTRCB. Serial TTL to RCBUS Converter.
x1 Cable Jack Connector to SP13 connector for SATPRO-RCBUS.
x1 Cable with MiniJack conector to RC Connector (3pins).
CURCB. USB to RCBUS converter for SATPRO.
CURCB is used to adapt an RCBus interface to USB.
In this way you can connect a tracker antenna like SATPRO to a PC, to give it commands or use the Mavlink protocol in streaming.
Normally it is necessary together with CTRCB and SATPRO when we use a Datalink from other brands that aren't XLRS.
Functioning:
3 modes:
Boot.
Commands.
Streaming.
Conections:It has two connectors, one for USB type “C” that connects to the PC and another RCBus that connects to the SATPRO. Only with the CURCB module you can command the SATPRO, but to use the Mavlink download protocol, the CTRCB module that complements it will be necessary.
RCBUS:SATPRO native communications. Use a special 7m cable.
Speed: 1Mb. Synchronous binary packages.
IP8: 10
USB:It is powered by USB.
Speed: 115200b fixed.
LEDs:Power, turns on when you connect the USB.
TX and RX. They light up when there is data to or from the USB.
Manual: Content:x1 CURCB. USB interface Module for SATPRO.
CABLE_RCB_SP13. RCBUS cable with SP13 (3 Pin) female connectors.
RCBUS cable with SP13 (3 Pin) female connectors on both extremes.
For connection between XLRS Remote Controllers, GCS... devices with WMX481 RF module or similar.
CONTENT:
x1. CABLE_RCB_SP13. RCBUS cable with SP13 (3 Pin) female connectors.
Delivery date: Can be shipped within 2-3 days. 
GCSD5. Ground Control Station D5.
Ground Control Station for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
Of the XLRS series of individual Ground Controls Stations, the GCSD5 is the largest and most powerful, designed with the latest XLRS system technology of 2023, 17.3″ high-brightness screen, more powerful PC, color LCD screen...
Get more information about the product:
GCSD5. Ground Control Station D5.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 45-60 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.5 in stock
XPAD5. All-in-one Portable Ground Control Station D5.
New product! Request your reservation.
All-in-one Portable Ground Control Station D5 for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
XPAD5 is a portable and professional ground control station (GCS) with 7 inch HD and high-brightness touch screen display, secondary instrument screen for viewing at all times the current status of the XLRS (Radio and Video) telemetry, battery and system status in general, it has integrated Radio Control, Transparent / Mavlink Telemetry, Full HD video link and Powerful high-performance PC, all in one, is a portable, easy-to-use tool.
In XPAD5 there are two options for the screen, you can use only 1 single screen (You can view the video and the map at the same time from Mission Planner or similar software) or the dual screen option (To view the map on one screen and the video on another screen or other functions).
Radio Control and Telemetry admit frequencies of 433Mhz or 863-950Mhz up to 1W of power, maximum range up to 250Km (LOS)
For Full HD Video, it supports 2.4Ghz from 800mW to 4-8W depending on the working range needed, maximum range up to 150Km (LOS).
The maximum ranges can be obtained if a SATPRO tracker antenna is used.
The XPAD5 case is made of aluminum, methacrylate and plastic.
Besides, the XPAD5 has a built-in 3S 5000-10000mAh Li-ion battery which could provide 3-4 hours operation time with full capacity. Ability to connect external power.
Specifications XPAD5 (All-in-One, Portable Ground Control Station):
Main Screen: Touch Display, 7″, IPS, 178º visual angle, 1024×600 high resolution.
Secondary Screen: TFT IPS color screen with 4.3″ high resolution.
PC: Intel® Core™ M3-8100Y, Dual-Core, 1.1-3.4GHz, Intel® UHD Graphics 615, 8GB Memory, Dual-Band 2.5GHz/5GHz Wi-Fi & Bluetooth 4.2 & Gigabit Ethernet, Windows 10.
More than 28 programmable objects: 6 Buttons, 4 Switches with 2 positions, 2 Switches with 3 positions, 2 Push buttons, 2 MicroJoysticks of 4 positions + Enter, 2 Encoders with push button, 2 Potentiometers and 2 RC Joysticks.
Low latency: OFDM modulation (200mSeg).
Interfaces: Wifi, USB, Ethernet, HDMI, Port Com, RCBUS.
Radio Control & Transparent Data Link / Mavlink Telemetry Frequency: 433Mhz or 863-950Mhz.
Video / Data Link Frequency: 2.4Ghz (2408 - 2480Mhz).
Encryption: AES128.
Frequency Hopping or Fixed.
Dimensions: 350 x 250 x 550mm appox.
Specifications XVTR (Professional RC/ Telemetry Receiver and Video Transmitter):
Low latency: OFDM modulation (200mSeg).
Interfaces: Ethernet, HDMI, UART, SBUS, RCBUS.
Radio Control & Transparent Data Link / Mavlink Telemetry Frequency: 433Mhz or 863-950Mhz.
Video / Data Link Frequency: 2.4Ghz (2408 - 2480Mhz)
Encryption: AES128.
Frequency Hopping or Fixed.
Dimensions: 111 x 72 x 34mm appox
More info: XVTR. Long Range RC Receiver and Video TX Full HD.
Note: It is still in design, there isn't information and final images of the product but the technology and appearance is similar to the GCSD5, we have made a similar, powerful, more compact and lighter product.
We have integrated the WMX481 transmitter module and the XVRE digital video receiver into the XPAD5.
You can see more information about similar products to get an idea and information:
GCSD5. Ground Control Station D5.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 90-120 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.
GCSD4V2+. Ground Control Station D4 V2 PLUS.
Ground Control Station for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
Get more information about the product:
GCSD4V2. Ground Control Station D4 V2.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 30-45 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.
SATPRO V3. Professional Smart Antenna Tracker.
Professional automatic tracking antenna for Radio Control, Mavlink Telemetry and Video systems, for all types of applications with Aerial, Land or Maritime Vehicles.
SATPRO V3 is a tracking system, composed of a rotating head, two arms where the antennas are placed and an anchoring system to a fixed base or tripod.
The main function is to automatically follow the position of the vehicle, orienting the antennas to obtain the best possible RF link at all times in LOS (Line Of Sight) applications.
Customizable, you can install the long range XLRS system up to 250Km (LOS) or any telecommunications system you need, including jammers for drones for example.
Get more information about the product:
SATPRO. Professional Smart Antenna Tracker.
XVHD_SAT. Digital Video System
Delivery date: Can be shipped within 30-60 days (Depending on the options selected).
WMX481V3. Long range transmitter for radio control and telemetry, connection and communication with ...
* This product replaces the following products: BTSD1x, DL1x.
The WMX481V3 transmitter module connects and communicates via RCBUS cable to your remote controller, GCS or SATPRO.
Connection with modified remote controllers, GCS or SATPRO: WMX481 it has a male SP13 connector and connects via a 5 meter RCBUS cable with SP13 female connectors at both ends, at one end it connects WMX481 and at the other ends it connects to the remote controller, GCS or SATPRO which have a SP13 Male connector.
CONTENT:
x1. WMX481V3 + (BQ89, MX433 or without antenna, according to selected option).
* Images shown are for illustrative purposes only and may not be an exact representation of the product.
KITXLRSDL1R-V2. Redundant Transparent Data Link / Mavlink Telemetry, max.250Km.
With this professional redundant telemetry radio set you can get Transparent Data Link / Mavlink Telemetry up to 250Km (LOS), prepared for all types of FPV or DIY projects, for Drone, UAV, USV, UGV, Robots....
Two different frequency bands can be used (according to standards and countries, you can only use different frequencies in a single band), for example (433Mhz and 915Mhz) or (903Mhz and 915Mhz), increasing security against interference if any and reflections of the RF signal.
Furthermore, if one of the two receivers or one of the two transmitters failed, it would not be noticed, link C2 would continue to operate.
Redundant mode: The TXDL1R-V2 internally contains 2 transmitters working in redundant mode and for the vehicle two RXDL1 receivers working in redundant mode are used, these will be connected through the "RCBUS2" port.
Normally the receivers are configured to use real-time redundancy, that is, if a single radio packet fails, the system corrects it packet by packet.
In the event of a failure of one of the two receivers, the system will continue to function the same, the pilot will not notice any failures.
On the ground: You have the TXDL1R-V2 redundant transmitter (TX1 & TX2), it can communicate with the Mission Planner software, QGroundControl or similar to a PC, Tablet, SmartPhone... via USB, (COM5) Serial TTL or Wifi.
On the Drone, UGV, USV...: You have two RXDL1 receivers (Redundant Mode), RX1 will be connected directly to any autopilot compatible with the mavlink protocol (Cube, Pixhawk, CUAV, APM, etc...) through the "TELEM1" telemetry port and from RXDL1 to "MODEM" port or TTL serial port (COM5) to send/receive transparent data. RX2 will be connected by port "RCBUS2" along with RX1 and if RX1's packets fail then RX2 will immediately start working.
To obtain the maximum range of the system it is necessary to use a SATPRO tracker antenna.
Get more information about the product:
Content:
* The final content of the product will depend on the options selected.
x1 TXDL1R-V2, Redundant Transmitter (TX1 & TX2), Transparent Data Link / Mavlink Telemetry. x2 RXDL1, Receiver, Transparent Data Link / Mavlink Telemetry. x3 Omnidirecctionalt antennas 5dBi (868-928Mhz or 433Mhz) x1 or x2 (Optional) BQ89. Biquad antenna 866-920Mhz, 9dBi or x1 MX433. Moxon Rectangle Antenna 400-480Mhz, 5.5dBi. x3 LAT54_SMAH/SMM. Cable SMA-Female to SMA-Male, 540mm. x1 CABLE_SERVO_HH. Cable Servo RC Female to Female, 200mm. x1 CABLE_EXT_SERVO_MH. Extensor Cable Servo RC Male to Female, 300mm. x1 CABLE_PX4_RX. Adapted Cable for Cube autopilot, 300mm. x1 CABLE_USB/MICROUSB- Cable USB-A to Micro USB-B Male, 0,5-2m.
Estimated delivery time: 15-20 days. *The images and information is preliminary, it is possible that the final product has changes.
GCSD1A. Ground Control Station D1.
Prepared for automatic missions, integrated PC and radio control XLRS system with gamepad-type joysticks that can be used in case manual control is required.
Get more information about the product:
Delivery date: Can be shipped within 30-45 days.
KITXLRSXD1. Remote Controller XPAD1 and Receiver RXLRSD1, Radio Control and Mavlink / Transparent Da...
More information:
- XPAD1. Small Remote Controller.
- RXLRSD1. Professional Radio Control & Telemetry Receiver.
- XPAD1. Unboxing.
KITXLRSXD1-VTX. Remote Controller XPAD1, Receiver RXLRS, FPV Monitor, Video TX, Radio Control and Ma...
Kit prepared for short range FPV-UAV applications.
XLRSD1 system with XPAD1 remote controller, RXLRS receiver, together with XOSD3B video transmitter 5.8Ghz and FPV monitor at 5.8Ghz.
Useful for:
Applications that need remote control and analog video for a few kilometers (2-4Km) away to control aircraft or vehicles such as Drones, Robots, Cars, Boats, etc.
More information about XPAD1:
- XPAD1. Small Remote Controller.
- RXLRS. Professional Radio Control & Telemetry Receiver.
- XPAD1. Unboxing.
