📧 Contact Us: sales@dmd.es
💬(+34) 615 18 50 77
XVHD-FX. Radio Control, Data link and Full HD Video System 2.4Ghz.
Radio Control, Data link and Full HD Video System 2.4Ghz.
The XVTR aerial unit has HDMI/Ethernet/AV and other video interfaces, 2 UART interfaces and 1 SBUS output interface.
The ground unit XVRE has HDMI/Ethernet (RJ54), 2 UART interfaces and 1 SBUS input interface.
The serial port supports Mavlink protocol and transparent protocol.
Both units have AES128 encryption.
For Radio Control: You can use a standard transmitter and connect it through the SBUS of the XVRE ground unit. Then on the XVTR Aerea unit you can connect the SBUS to an autopilot (Cube, Pixhawk, APM...) or similar device.
For mavlink telemetry or transparent data link: You can connect the UART of the XVTR air unit to the telemetry port of the autopilot (Cube, Pixhawk, APM) or other device. Then on the XVRE ground unit you can connect it through the UART (Using a TTL - USB serial converter to connect it to the PC) or through Ethernet (UPD or TPC) (You can also watch the video at the same time) and connect to any software like Mission Planner, QGroundControl or similar.
For Video: On the XVTR air unit you can connect to the camera or gimbal via HDMI or Ethernet. Then on the XVRE Ground unit you can connect a screen via HDMI or through the Router or PC to Ethernet.
If it is required to obtain more range in Radio Control and Telemetry, then a second integrated system can be used at 433Mhz or 863-950Mhz with a range of 250Km (LOS) that will work together with a GCS XLRS, this will work at the same time with the system 2.4Ghz, consult about the XVHD-SAT product.
Note: To obtain these ranges it is necessary to use a SATPRO tracker antenna or similar.
Delivery date: Can be shipped within 30-45 days (Depending on the options selected).
*The images and information is preliminary, it is possible that the final product has changes.
CABLE_RCB_SP13. RCBUS cable with SP13 (3 Pin) female connectors.
RCBUS cable with SP13 (3 Pin) female connectors on both extremes.
For connection between XLRS Remote Controllers, GCS... devices with WMX481 RF module or similar.
CONTENT:
x1. CABLE_RCB_SP13. RCBUS cable with SP13 (3 Pin) female connectors.
Delivery date: Can be shipped within 2-3 days. 
DCMOTORDRI-RC. 10Amp 7V-30V DC Motor Driver for R/C (2 Channels).
Building a RC vehicle or mobile robot without any microcontroller? DCMOTORDRI-RC is what you need. It's plug and play and can be connected directly to the RC receiver. No coding or programming is needed. Selectable mixed mode allow the differential drive motors to be controlled from a throttle (forward-reverse) and a steering channel. Onboard switching regulator which produces 5V output is also available to power the RC receiver. This eliminates the need of extra battery eliminator circuit (BEC).
Features:
- Plug & play, controlled from RC directly.
- Auto calibration upon power up.
- Selectable mixed or independent input mode.
- Bidirectional control for two brushed DC motor.
- Operating Voltage: DC 7V to 30V
- Maximum Motor Current: 10A continuous, 30A peak
- Onboard 5V switching regulator to power the RC receiver (500mA max).
- Buttons for quick testing.
- LEDs for motor output state.
- 20kHz motor output PWM frequency.
- Overcurrent protection with active current limiting.
- Temperature protection.
- Undervoltage shutdown.
- Operating Voltage: DC 7 V to 30 V.
- Maximum Motor Current: 10 A continuous, 30 A peak.
- Motor Output PWM Frequency: 20 KHz.
- RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V.
- 5 V Output Maximum Current: 0-500 mA.
- RC Signal Timing.
- Frequency: 10-100 Hz.
- Deadband: ±35us.
- Fullscale: ±435us.
- Size: 88.90 x 48.26 mm (L x W)
- 1 x 10Amp 7V-30V DC Motor Driver for R/C (2 Channels).
- 2 x 2561 3-way connector extension wire.
- 4 x PCB Spacer.
GCSD5. Ground Control Station D5.
Ground Control Station for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
Of the XLRS series of individual Ground Controls Stations, the GCSD5 is the largest and most powerful, designed with the latest XLRS system technology of 2023, 17.3″ high-brightness screen, more powerful PC, color LCD screen...
Get more information about the product:
GCSD5. Ground Control Station D5.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 45-60 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.5 in stock
XPAD5. All-in-one Portable Ground Control Station D5.
New product! Request your reservation.
All-in-one Portable Ground Control Station D5 for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
XPAD5 is a portable and professional ground control station (GCS) with 7 inch HD and high-brightness touch screen display, secondary instrument screen for viewing at all times the current status of the XLRS (Radio and Video) telemetry, battery and system status in general, it has integrated Radio Control, Transparent / Mavlink Telemetry, Full HD video link and Powerful high-performance PC, all in one, is a portable, easy-to-use tool.
In XPAD5 there are two options for the screen, you can use only 1 single screen (You can view the video and the map at the same time from Mission Planner or similar software) or the dual screen option (To view the map on one screen and the video on another screen or other functions).
Radio Control and Telemetry admit frequencies of 433Mhz or 863-950Mhz up to 1W of power, maximum range up to 250Km (LOS)
For Full HD Video, it supports 2.4Ghz from 800mW to 4-8W depending on the working range needed, maximum range up to 150Km (LOS).
The maximum ranges can be obtained if a SATPRO tracker antenna is used.
The XPAD5 case is made of aluminum, methacrylate and plastic.
Besides, the XPAD5 has a built-in 3S 5000-10000mAh Li-ion battery which could provide 3-4 hours operation time with full capacity. Ability to connect external power.
Specifications XPAD5 (All-in-One, Portable Ground Control Station):
Main Screen: Touch Display, 7″, IPS, 178º visual angle, 1024×600 high resolution.
Secondary Screen: TFT IPS color screen with 4.3″ high resolution.
PC: Intel® Core™ M3-8100Y, Dual-Core, 1.1-3.4GHz, Intel® UHD Graphics 615, 8GB Memory, Dual-Band 2.5GHz/5GHz Wi-Fi & Bluetooth 4.2 & Gigabit Ethernet, Windows 10.
More than 28 programmable objects: 6 Buttons, 4 Switches with 2 positions, 2 Switches with 3 positions, 2 Push buttons, 2 MicroJoysticks of 4 positions + Enter, 2 Encoders with push button, 2 Potentiometers and 2 RC Joysticks.
Low latency: OFDM modulation (200mSeg).
Interfaces: Wifi, USB, Ethernet, HDMI, Port Com, RCBUS.
Radio Control & Transparent Data Link / Mavlink Telemetry Frequency: 433Mhz or 863-950Mhz.
Video / Data Link Frequency: 2.4Ghz (2408 - 2480Mhz).
Encryption: AES128.
Frequency Hopping or Fixed.
Dimensions: 350 x 250 x 550mm appox.
Specifications XVTR (Professional RC/ Telemetry Receiver and Video Transmitter):
Low latency: OFDM modulation (200mSeg).
Interfaces: Ethernet, HDMI, UART, SBUS, RCBUS.
Radio Control & Transparent Data Link / Mavlink Telemetry Frequency: 433Mhz or 863-950Mhz.
Video / Data Link Frequency: 2.4Ghz (2408 - 2480Mhz)
Encryption: AES128.
Frequency Hopping or Fixed.
Dimensions: 111 x 72 x 34mm appox
More info: XVTR. Long Range RC Receiver and Video TX Full HD.
Note: It is still in design, there isn't information and final images of the product but the technology and appearance is similar to the GCSD5, we have made a similar, powerful, more compact and lighter product.
We have integrated the WMX481 transmitter module and the XVRE digital video receiver into the XPAD5.
You can see more information about similar products to get an idea and information:
GCSD5. Ground Control Station D5.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 90-120 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.
GCSD4V2+. Ground Control Station D4 V2 PLUS.
Ground Control Station for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
Get more information about the product:
GCSD4V2. Ground Control Station D4 V2.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 30-45 days (Depending on the options selected). *The images and information is preliminary, it is possible that the final product has changes.
GCSD5DUAL. Ground Control Station D5 DUAL.
Ground Control Station D5 DUAL for Radio Control, Mavlink Telemetry / Transparent Data Link, Video, Maps and Navigation for all types of applications with Aerial, Land or Maritime Vehicles.
Standard or customized, if you need a customized GCSD5 DUAL, send an email to sales@dmd.es.
With Data Link XLRS system or without Data Link so you can connect it to your preferred system.
Latest generation Radio Control and Long Range Telemetry up to 250Km, Full HD video up to 150Km for XLRS systems.
For Pilot and co-pilot or observer with quality RC joysticks and lots of buttons, dials and switches for demanding control.
This product has the same technology as the GCSD5 to view preliminary information on this product access the following links:
GCSD5. Ground Control Station D5.
SATPRO. Professional Smart Antenna Tracker.
Delivery date: Can be shipped within 60-90 days (Depending on the options selected). *Tablet not included. *The images and information is preliminary, it is possible that the final product has changes.
LATx_ASMAM/ANM. Pigtail Cable Angled 90º SMA-Male to Angled 90º N Male, low loss.
Pigtail Cable, low loss with Angled 90º SMA-Male at one extreme to Angled 90º N-Male at the other extreme.
Suitable for extending the video antennas of the video modules RXVID or similar products.
Technical Characteristics:
Connector 1: Angled 90º SMA-Male
Connector 2: Angled 90º N-Male.
Note: If you need another length, you can send an email to dmd@dmd.es.* The images shown on this page are for reference only and may differ from the final products.
SATPRO V3. Professional Smart Antenna Tracker.
Professional automatic tracking antenna for Radio Control, Mavlink Telemetry and Video systems, for all types of applications with Aerial, Land or Maritime Vehicles.
SATPRO V3 is a tracking system, composed of a rotating head, two arms where the antennas are placed and an anchoring system to a fixed base or tripod.
The main function is to automatically follow the position of the vehicle, orienting the antennas to obtain the best possible RF link at all times in LOS (Line Of Sight) applications.
Customizable, you can install the long range XLRS system up to 250Km (LOS) or any telecommunications system you need, including jammers for drones for example.
Get more information about the product:
SATPRO. Professional Smart Antenna Tracker.
XVHD_SAT. Digital Video System
Delivery date: Can be shipped within 30-60 days (Depending on the options selected).
WMX481. Transmitter radio module for connection and communication with XLRS Remote Controllers, GCS ...
The WMX481 transmitter module connects and communicates via RCBUS cable to your remote controller, GCS or SATPRO.
Connection with modified remote controllers or GCS: WMX481 it has a male SP13 connector and connects via a 5 meter RCBUS cable with SP13 female connectors at both ends, at one end it connects WMX481 and at the other ends it connects to the remote controller or GCS which have a SP13 Male connector.
Connection with SATPRO tracker antenna: WMX481 is connected through an RCBUS cable of approximately 0.5 meters with a 3.5mm male jack connector on one end and this connects directly to the RCBUS port with a 3.5mm female jack connector of antenna tracker SATPRO.CONTENT:
x1. WMX481 + (MX433 or BQ89 antenna, according to selected option).
Delivery date: Can be shipped within 7-10 days.
KITXLRSDL1R-V2. Redundant Transparent Data Link / Mavlink Telemetry, max.250Km.
With this professional redundant telemetry radio set you can get Transparent Data Link / Mavlink Telemetry up to 250Km (LOS), prepared for all types of FPV or DIY projects, for Drone, UAV, USV, UGV, Robots....
Two different frequency bands can be used (according to standards and countries, you can only use different frequencies in a single band), for example (433Mhz and 915Mhz) or (903Mhz and 915Mhz), increasing security against interference if any and reflections of the RF signal.
Furthermore, if one of the two receivers or one of the two transmitters failed, it would not be noticed, link C2 would continue to operate.
Redundant mode: The TXDL1R-V2 internally contains 2 transmitters working in redundant mode and for the vehicle two RXDL1 receivers working in redundant mode are used, these will be connected through the "RCBUS2" port.
Normally the receivers are configured to use real-time redundancy, that is, if a single radio packet fails, the system corrects it packet by packet.
In the event of a failure of one of the two receivers, the system will continue to function the same, the pilot will not notice any failures.
On the ground: You have the TXDL1R-V2 redundant transmitter (TX1 & TX2), it can communicate with the Mission Planner software, QGroundControl or similar to a PC, Tablet, SmartPhone... via USB, (COM5) Serial TTL or Wifi.
On the Drone, UGV, USV...: You have two RXDL1 receivers (Redundant Mode), RX1 will be connected directly to any autopilot compatible with the mavlink protocol (Cube, Pixhawk, CUAV, APM, etc...) through the "TELEM1" telemetry port and from RXDL1 to "MODEM" port or TTL serial port (COM5) to send/receive transparent data. RX2 will be connected by port "RCBUS2" along with RX1 and if RX1's packets fail then RX2 will immediately start working.
To obtain the maximum range of the system it is necessary to use a SATPRO tracker antenna.
Get more information about the product:
Content:
* The final content of the product will depend on the options selected.
x1 TXDL1R-V2, Redundant Transmitter (TX1 & TX2), Transparent Data Link / Mavlink Telemetry. x2 RXDL1, Receiver, Transparent Data Link / Mavlink Telemetry. x3 Omnidirecctionalt antennas 5dBi (868-928Mhz or 433Mhz) x1 or x2 (Optional) BQ89. Biquad antenna 866-920Mhz, 9dBi or x1 MX433. Moxon Rectangle Antenna 400-480Mhz, 5.5dBi. x3 LAT54_SMAH/SMM. Cable SMA-Female to SMA-Male, 540mm. x1 CABLE_SERVO_HH. Cable Servo RC Female to Female, 200mm. x1 CABLE_EXT_SERVO_MH. Extensor Cable Servo RC Male to Female, 300mm. x1 CABLE_PX4_RX. Adapted Cable for Cube autopilot, 300mm. x1 CABLE_USB/MICROUSB- Cable USB-A to Micro USB-B Male, 0,5-2m.
Estimated delivery time: 15-20 days. *The images and information is preliminary, it is possible that the final product has changes.
KITXLRSDL1V2. Transparent Data Link / Mavlink Telemetry, max.250Km.
With this professional telemetry radio set you can get Transparent Data Link / Mavlink Telemetry to 863-950Mhz or 433Mhz up to 250Km (LOS), prepared for all types of FPV or DIY projects.
On the ground: You have the TXDL1V2 transmitter that is placed together with the BQ89 antenna (For the frequency of 863-950Mhz) or Moxon antenna (For the frequency of 433Mhz), it can communicate with the Mission Planner software, QGroundControl or similar to a PC, Tablet, SmartPhone... via USB, (COM5) Serial TTL or Wifi.
On the Drone, UGV, USV...: You have the RXDL1 receiver, it can be connected directly to any autopilot compatible with the mavlink protocol (Cube, Pixhawk, CUAV, APM, etc...) through the "TELEM1" telemetry port and from RXDL1 to "MODEM" port or TTL serial port (COM5) to send/receive transparent data.
To obtain the maximum range of the system it is necessary to use a SATPRO tracker antenna.
Get more information about the product:
Content:
x1 TXDL1V2, Transmitter, Transparent Data Link / Mavlink Telemetry. x1 RXDL1, Receiver, Transparent Data Link / Mavlink Telemetry. x2 Omnidirecctionalt antennas 5dBi (868-928Mhz or 433Mhz) x1 (Optional) BQ89. Biquad antenna 866-920Mhz, 9dBi or x1 MX433. Moxon Rectangle Antenna 400-480Mhz, 5.5dBi. x2 LAT54_SMAH/SMM. Cable SMA-Female to SMA-Male, 540mm. x1 CABLE_SERVO_HH. Cable Servo RC Female to Female, 200mm. x1 CABLE_EXT_SERVO_MH. Extensor Cable Servo RC Male to Female, 300mm. x1 CABLE_PX4_RX. Adapted Cable for Cube autopilot, 300mm. x1 CABLE_USB/MICROUSB- Cable USB-A to Micro USB-B Male, 0,5-2m.
Estimated delivery time: 15-20 days. *The images and information is preliminary, it is possible that the final product has changes.